Panhandle Farmers & Ranchers Consignment Auction Online

Panhandle Farmers & Ranchers Consignment Auction Online

Thursday, October 15, 2020

LOCATION:  Online Bidding!  Items located across the panhandle.  Check Individual Listing for directions to view equipment!

**THIS IS A PRELIMINARY LISTING!  More details and photos will be posted soon along with the online catalog!  Stay tuned!**


LOCATION: From Hay Springs, NE, go 13 miles south on Hwy 87 to 440th Rd. Go 3 miles East to 420th Lane.  Go North about 3/4 mile to Auction Site on East side.  

International S1600 truck, 1986, Single axle, Knapheide stake bed flat bed with tommylift gate, has Norwesco 1600 gallon tank, Detroit diesel
1982 International Model 1954 Dump Truck single axle with airlift tag behind, has spreader gate, air brakes, 5 spd hi/Lo, air actuated end gate, Detroit motor
1976 Ford F-700 truck with 450 power box manure spreader, single axle, 5spd hi/Lo, gas motor, box needs repair, has feeder attachment
Ford F-600 Feed Truck, Harsh Box, needs work

Crustbuster 4000 Min-Till Drill 48’ 7.5” Spacing Model 4000MT 4C Serial Number – 10860
Hesston 1170 Hydro-swing swather, 16’ head, sn- 170H 61119, may need work
3-wheel water wagon, 600gl tank, 5hp Briggs
3-wheel Fert trailer, 1000 gal tank, hyd pump, 10.00×20 truck tires in rear, 12.5L 15 front
Case 1010 30’ wheat head, steel bat reel w/ hyd, good shape
Bush Hog 24’ Spring tooth w/ harrows, hyd raise
Pair of AgriProducts 300 gallon saddle tanks
Top Air TA 1100 pull type sprayer, 80’ booms, new hyd pump last year, rinse tank, 3 section control
300 gallon OH fuel tank on stand • 500 gallon diesel tank w/12v pump • 120 gallon fuel tank w/ 12v pump • 500 gallon steel tank • 300 gallon oval tank on stand • Windmill tower with 8’ Aermotor head • 3pt HD pallet fork attachment • Misc well parts, electric motors, casing, valves • Gorman-Rupp trash pump on wheels, gas motor • 5 front ends from tractors various makes, all wide front • Pull type automatic land leveler • Gas powered log splitter • Dyno tester on wheels • 40+ Front weights • 30+ rear wheel weights • 6 quick hitches • 35×12.50×20 aftermarket Chevy wheels and tires • 215x70x15 Toyota wheels and tires • 2001 ford replacement bumper, gear no deer •

1982 42 ft. Cornhusker Hopper trailer, tandem axle, spring ride, convert-a-hopper, aluminum wheels, roll tarp
Hobbs tandem axle hopper trailer, aluminum sides steel frame, tires fair, used last year 38’
Pickup box trailer with American cryogenics portable welder

High line 7000 bale retriever, 6-bale mover
John Deere 530 baler, twine tie, 540 pto


LOCATION: 4 miles East on 440 rd to 420th lane then 1/2 mile North

Ford F-600 truck, bubble nose, 15.5’ steel box, steel floor with new Westfield hyd drill fill auger, new rebuilt gas motor, straight truck, single axle


LOCATION:5771 #2 Lincoln Rd., Alliance, NE 69301

6 x 40 ft Speed King auger • 16 John Deere closing wheels for 7200 planter • Paint Mixer • Kinzer conveyor grain cart parts brand new • 8 grain aerators • Outback S2 GPS system • 19 grain bin air tubes –  12” diameter by 48” long • Pallet fork drum mover • Stand & vise • Skid steer dozer blade • Val 6 Heater • Hydraulic Pumps


LOCATION:1/4 mile west of the Kuskie Oil Bulk Fuel Plant North and East of Bridgeport, NE on Hwy 385 (near the Meadow Park Motel and RV Park)

2001 Chevy 2500 HD Pickup, 4×4, 4 Dr., LS, 6.0l Eng., 344,626 miles, 140k on Trans., torque Converter & Ring Gear, PW, 7 ft. Box, has had motor tick for 2 yrs., uses no oil, Ranchy, Still runs OK!
New Grill guard for 2006 Honda Pilot
Farmall 656 Gas Tractor, WF, w/ Farmall F-11 Loader, TA Works, 16.9×34 Rubber (20%), All working cond., Good Tractor, sn8693
JD Pull type sickle Mower, 7 ft. Bar, Good, sn11-6477
1978 Donahue 6×20 GN Stock Trailer, Tandem, Good Floor
18 – 10ft. Portable Panels, Good
McCormick “New Big 4” Horse-Drawn Mower, less seat
AC 2 Bottom One-way Plow
Tandem Water Tank Running Gear
Powder River Cattle Working Chute, Converted to Hyd., Good Floor, Works, Good
11- 10 ft. Assorted Portable Panels
H & W 8’ x 3’ Oval Stock Tank
H & W 58” Round Stock Tank
6 – H & W 10 ft. Portable Panels, green
11 Hi-Qual 12’ Portable Horse Panels & 1- 6’ Ride-Thru Gate


Items Located: from Bayard, Nebraska – 3/4south on Hwy 26 to CR 104 then 2 & 1/2 miles west. (Note: Private Land! Items will be available for inspection on Preview Date only! – Date TBD! Thank you!)

** Elmer is 91 years old and is retiring from the gravel business. All Items are to be removed by the Buyer prior to November 1, 2020! **

1972 Ford LN750 Dump Truck, older 10 yard Steel Box, new rebuilt 361 engine, tandem tag axle, box a little rough, runs good.
Caterpillar D7 Crawler Tractor, 10 ft. Dozer, sn3T7584, runs good, rear cable needs re-strung, needs work on main leaf spring.
Hough 65 Payloader, 8 ft. bucket, pretty good shape for it’s age, front diff. has noise going down the road, good rubber all around, rebuilt engine a while back, needs brake work, works and runs.
MF 55 Payloader, running condition, steering cylinder leaks oil, has a newer hyd. Pump but doesn’t lift too good when oil gets hot.
Spitz 8 inch Gravel Pump, Ni-Hard, new leathers, newer impeller and wear plate, 60 feet of stinger, 8 inch discharge 10 inch suction,  pipe and pump float are sold still in the lake, sold with stiff leg (on-shore) to grade gravel and extra pipe.
Kolman Vibrator Screen Plant • 60 Ft. Belt Conveyor • Martin Machine Co. Mdl. 7 older 7 ton, 12’x8’, gooseneck pull-type Trailer to haul Cat. • Old AC power unit, as is. • 300 OH Fuel Tank

Note: All Items to be removed by the Buyer before November 1, 2020!


25-3’ x 8’ Metal Panels from Car Hauler Rail Cars (Would make great windbreaks or animal pens

40’ x 9.5’ Tops from Rail Cars – Could easily be animal shelter, carport, hay cover, etc


Directions: Table Road, South of Chadron, go west 20 miles

International Transtar 4300 Day Cab Truck, 330 Cummins Motor, 11R22.5 Rubber, 10 Speed Transmission, 780,291 mi., Needs New Seal in the Rear End, New Brakes, Runs good, doesn’t use any oil. Good Farm Truck.

Great Plains Solid Stand 36 Double Disc Drill, 36’, 6” Spacing, Front Fold, Rubber Press Wheels, One Fold Cylinder Needs Work. No Grass Aggitator. Used Drill Last Year. Marker Arms are off Drill but Will be Solid with Drill.

Degleman 10’ Dozer Blade, Model 10 HD, sold with 2-1’ Extensions, Come Off 1470 Case Tractor, Sold with Brackets. One Way Hydraulics, Manual Angle. Serial-10568Seller will assist with loading

Balderson Model BV11 V Plow, 10’ Cut, Serial-6107, Mounts on Straight Frame Road Grader.

 Jay Fistler –  308-430-3711


HD 3 pt. 2 Bale Mover, Straight.


5501-Approx. 38 Pieces of Grain Bin Tin, 28-4’x16’, 10-33”x16’. Curved Metal, Some Pieces have access Holes Cut Out.

5502-Krone KR280D Big Round Baler, Net Wrap, 31×13.5-16 Rubber, Chain Chamber,  Works, 540 PTO, Sold With Fasse Valve and Control Box, Serial-8733

5503-John Deere 566 Big Round Baler, 1000 PTO, Good Belts,  Bales, String Or Net Wrap, 5×6 Bales, Serial-116386,  Monitor, Side Doors Bent.

5504-John Deere 8300 Grain Drill, 14’, 10” Spacing, Rubber Press Wheels, Serial-027183, Clean Box, Single Disc, Needs New Tire, Was Set Up For Liquid Fert., 7.50-20 Rubber.

5505-13- The Infiltrator Chambers for Leech Field, 6’ Long by 1’ Tall, Model H10

If you would like to add your items to this Auction, please call Kraupie’s or fill out the form below and someone will contact you! All consignments must be received by September 25, 2020 at 5pm.  Thank You!


Form for Listing Items for Area Farmers & Ranchers 2020 Consignment Auction
  • NO SMALL ITEMS!! Complete descriptions appreciated. We will contact you for more information if needed. This form is not a guarantee that your item will be included in the catalog! Someone from our office will contact you after receiving this form to complete a sale contract. If you do not hear from us within 2 business days, please call 308-262-1150. All consignments must be received by September 25, 2020 at 5pm.
  • Drop files here or
    Please upload any pictures of the items you have.