J&J Cattle Company Equipment Auction

AUCTION

Friday March 3, 2017     Sale Time: 10:32 am

Located at 7000 Valley Rd., from Alliance, NE on Hwy 385,  6 mi. South to Wayne Road then 6 mi. West , 1 mi. north & 1 mi. West

Proxibid Auction Results

TRACTORS

2013 NH T7.235 Tractor, 3 Pt., 4 Rear Remotes, 1,187 Hrs., 18.4R42 Rear Tires, 14.9R30 Fronts, PS Trans., EX Steer Guidance System, sn4821119445, Hi-Vis Cab, snZDBZ09188, w/ NH 855T Loader, Joystick, Loader Sideframes, 3 Mid-Mt. Valves, 95” Bucket, snYDWLR0069  Rated @ 185 E. Hp and 150 PTO Hp

2005 CIH MXM 175 Tractor, PS, 3 Pt., 4 rear Remotes. Suspended Cab, 18.4R42 Rear Tires, 14.9R30 Fronts, Approx. 5700 hrs.,(524 on current panel), snACM249273 EZ Steer 500 Guidance System -sn4813530672  Rated @ 145 Hp

1995 CIH 7250 MFWD Tractor, 3 Pt. w/ QH, 4 Rear Remotes, 13 Front Weights, 6247 Hrs., 18.4R46 Rear Duals, 16.9R30 Fronts, sn-JJA0057129

1975 Case 970 Tractor, Cab, 10 Front Wts., 5,548 Hrs on Tach, 16.9×38 Rear Tires, Dual Rim Hubs, sn8771947

IH 1066 Tractor, Cab, 1977 Hrs. on Tach, 18.4R38 Rear Tires, 11L-15 Tri-Rib Front Tires, 2 Rear Remotes, 1000 & 540 PTO

IHC 666 Tractor, w/ F-11 Loader, Open Station, 2 Hyd., 16.9×38 Rear Rubber, 5’ Bucket w/ Grapple, Arms re-enforced.

IHC Super C Tractor, Single Front, 540 Pto, 11.2×36 Rear Rubber, Shaft for Belt Pulley, Plumbed for Hyd.

 

TRUCKS

1989 Intl. S2300 Truck, Aulick 20 ft. Box w/ Harsh hoist, 60” sides, full endgate, grain gates, LTA 10 eng., Eaton Fuller 9 spd. trans., 206,335 miles, fair condition.

2005 Chevy Duramax 3500 Pickup, 11 ft Flatbed, Duals, Newer Trans., 141,203 mi., Good Condition.

1985 Ford F8000 Dump Truck, Tandem, 12 Yd. Box, fair condition.

1971 Dodge 500 Truck 4 Speed 318 Motor W/ 450 Farmhand Manure Spreader & Feeder Attachment, Runs Good.

Ford Cabover Truck w/ Beet Box, doesn’t run

TRAILERS

2012 PJ Flatbed GN Trailer, tandem duals, fold up ramps, electric winch, 10,000lbs axels, very good.

2007 Titan 24 ft. GN Stock Trailer, 3 compartment, good condition.

 

FEED TRUCK

1998 Intl. 4700 Feed Truck, 60016 16 Ft. Roto Mix Box, Stainless Steel Lined, New Augers In 2013, 466E Engine, Scales, Alison Auto Trans., Good Cond

Separate: 2 Flotation Tires-6.00x40x22.5

LIVESTOCK EQUIPMENT

2008 Hagedorn 3290 Hyd. Manure Spreader, sn4845, Updated Tailgate, Lg. Front Debris Rack, Vertical Beaters
2007 Hagedorn 3290 Hyd. Manure Spreader, sn4617, Front Slide Update, Left Axle Re-fabbed,  Front Debris Rack, Vertical Beaters
Work Saver Bale Spear, 3000# Capacity
2002 Deweeze Bale Processor, Chain Feed, Sickle Slicer, Side Load, Rt. Hand Discharge
IHC 750 Tub Grinder, Tub Good, Newer Hammers, Expanded metal on Tub Ring for improved Drive Traction, Decent Drive Tire
XG 40 Tub Grinder
2000 Degelman 12’ Dozer, Mid-Mount, Silage Rack, Cutting Edge, Mts. For Case 7250
Big Dog 10’ Scraper, Hyd. Tilt, Tilt Axle, Newer Cutting Edge (reversible
10’ Scraper)
Fly Mister/Sprayer, 3 pt, pto
Silage Innoculant Injector Pump, elect.
Farmhand Tub Grinder, for parts
New Holland Tub Grinder, for parts

HARVEST EQUIP.

Hesston Forage Chopper, Model 2000-150
Richardton 14 ft High Dump Wagon
Feterl 45’x8” Auger, PTO
Brandt 10 in. x 71 ft. Grain Auger, single auger swing out
Flex King 70 ft x 8 in. Auger, (bent)
Feterl Mdl 70 Rotary Grain Cleaner, pto
15’x5” Elect. Auger

HAY EQUIPMENT

2011 NH BR7090 Round Baler, snYBN047710, Swing Tongue (sn700902680) Net/Twine, Endless Belts, Specialty Crop, Wide Pick-up, Always Shedded, 2600 Bales, Bale Command Monitor]
CIH 8370 Swather, Swing Tongue, 14 ft., Rubber Conditioning Belts, 11L-15 Tires, Auger Good
JD Model 700 V Rake, 6 Bar, Hyd. Drive, 8’ Bars, Hitch Rebuilt
Rowse Mower, sn-NH-T9-5, Double 9 Hydro, NH heads, 9’ Bars, Riveted Sections.
JD 5200 Rake
Henning 3 pt Bale Mover, 2 bale
IHC 1100 Sickle Mower
Lahman 28’ Stack Mover
Hesston 30 Stack Mover
GN Hay Sled
JD 567 Wheel rake
FH F11 6.5’ Bucket

MISCELLANEOUS

1999 Honda Fourtrax ATV, little rough, runs
1000 gal. Fertilizer Nurse Tank w/ Honda Motor
IHC 60, 14ft. Stalk Shredder, pull type, 1000 pto
WinPower 30 KVA 200 Amp Portable generator, trlr. Mtd., pto
1200 Gal. Fert. Tank w/ Injector Pump on 4 Wheel Running Gear
IHC 10 ft. Rotary Mower, 3 pt.
Bush Hog 7 ft Rotary Mower, 3 pt.
IHC 595 Manure Spreader, for parts
FH Spreader Conv. to Fencing Cart
300 Gal. 3 pt. Sprayer, less pump
150 gal. Fire Fighter, Honda mtr.
4 in. Honda Trash Pump, near new
4 in. Homelite Trash Pump, Wisc. Mtr, needs work
Elect Pump Jack
176 RR Ties, in bundles
20 – 20 ft Steel Feed Bunks
5 Wood Feed Bunks
7 Misc. Feed Bunks
10 ft Stock Tank
Aermotor 6 ft. Head & parts
Shadle Sickle Sharpener
Category II Quick Hitch

2 Fertilizer Injector Pumps
OxyAcetylene Torch & Cart
Windbreak Net
PTO Pump Jack
Good amount of SCRAP IRON (sold at east location)

PLANTING & TILLAGE

Great Plains 30’ Drill, Solid Stand, 6” Spacing, No Markers, double disc, 5×8 Closing Wheels, Good Openers, No Rust in Boxes, Frame Straight
Krause 4907 Disc, 19 ft., 3 Section Folding
Sterling V Wheel Packer, 21 ft., Cast Rollers, 8” Spacing, 3 Section, Standard Tongue
Sunflower 6331 Land Finisher, 19 ft., 3 Section, 12” Sweeps, 20” Discs, 3 Bar Spike Harrows, Rolling Baskets, 11L-15 Tires on Wings & Cutters
IHC 7 Shank Subsoiler, 3 pt.
Melroe 24 ft. Folding Harrow
IH 4500 Cultivator w/ Noble harrows & Sweeps
IHC 800 8R Cyclone Planter, PT, Needs some repairs or parts unit
Krause 4650 Cultivator, 8R30
Flex King 21’ Rodweeder
Lilliston 8R30 Cultivator
JD 21’ Rotary Hoe, 3pt
JD 24 ft #100 Chisel, good Degelman Harrows
IHC 150 12 ft Grain Drill, 10 in. spacing
Kory  220 bu Gravity Wagon, with Hyd. Drill Filler

TERMS: Cash, Credit Card or immediately cashable Check day of sale!  No items to be removed until settled for.  All items sell as is, without warranty. Announcements at sale supersede all prior advertising, printed or oral. Loader available sale day and 1 week after, then by appointment. Lunch available at the sale! Selling Live! With large items on the internet on Proxibid.com.  All Tractors and Trucks have been serviced and ready to go to work!

J & J CATTLE COMPANY

For information please call Jerry at 308-760-0167